Authorized Partner of Container One, A+ BBB rated, 30 years in the container industry.
FAQ

Florida Shipping Container Questions, Answered

Questions about buying, placing, and maintaining a shipping container in Florida. If your question is not here, call or text (330) 510-5817 or send a message.

Pricing & Delivery

Yes, Container One's prices include delivery to your Florida address.
Delivery timing depends on location, payment, weather, container availability and site access. Container One's Delivery/Dispatch department contacts you to schedule the date and time.
Container One sells containers and does not rent them. Rent-to-own is available through a third-party partner, which spreads the payments and leaves you owning the container at the end. Our rent vs buy guide covers when each path makes sense.
Container One accepts cash, card, check or ACH. Financing is available through third-party partners. Payment terms are in the written quote.
Container One offers tilt-bed delivery and Customer Assist delivery. With tilt-bed delivery, the trailer tilts back and the container slides onto the ground. With Customer Assist delivery, a chain connects the container to an anchor point you provide on site. The container slides onto the ground as the trailer pulls away. Delivery requires 110 ft of straight, unobstructed space for a 20ft container or 130 ft for a 40ft container, measured forward from the placement point. The driver cannot turn within this space. The site also needs at least 15 ft of height for driving, at least 22 ft of height along the entire unloading path, and at least 10 ft of width. Choose flat, level ground for placement.

Florida Climate & Hurricanes

Shipping containers are strong steel structures rated to stack nine high when fully loaded at sea. However, in hurricane-prone areas like Florida, proper anchoring is needed. An unanchored container can shift or even become airborne in extreme winds. We recommend securing containers with anchor bolts to a concrete pad or using twist-lock tie-downs rated for your wind zone. In High Velocity Hurricane Zones (HVHZ) like Miami-Dade and Broward counties, additional anchoring requirements apply under the Florida Building Code.
Anchoring methods include: (1) Concrete slab with embedded anchor bolts: the container's corner castings are bolted directly to the foundation. (2) Twist-lock tie-downs: heavy-duty anchors driven into the ground or embedded in concrete that lock into the container's corner fittings. (3) Cable tie-downs: steel cables from the container corners to ground anchors. For HVHZ areas, your anchoring system should be engineered for the wind loads of your zone. We recommend consulting a local engineer or your county building department for site-specific requirements.
Shipping containers are made from Corten steel, which forms a protective patina that resists corrosion. However, Florida's salt air (especially within a few miles of the coast) accelerates wear on seals, hinges, and hardware. We recommend: (1) Apply a marine-grade protective coating or rust-inhibiting paint. (2) Keep door hinges and locking mechanisms lubricated. (3) Inspect gaskets and seals annually. (4) Place the container on concrete blocks or a pad to keep it off standing water.
Florida's humid climate can cause condensation ("container rain") on the interior ceiling and walls. Solutions include: (1) Install passive ventilation: whirlybird turbine vents or louvered side vents. (2) Use desiccant moisture absorbers (calcium chloride hanging bags). (3) If you have electrical access, use a plug-in dehumidifier. (4) For valuable or moisture-sensitive items, consider a modified container with spray foam insulation and climate control.
An unmodified steel container in direct Florida sun can get hotter inside than the outdoor air. For storage-only use, check that the items you plan to store can tolerate that heat. If you or your workers spend time inside, you have options: (1) Position the container in shade. (2) Apply a reflective roof coating (ceramic-based white coatings reduce roof heat). (3) Install insulation and a mini-split AC unit. Modified containers can include HVAC.
If your property is in a designated flood zone, you may need to elevate the container above the Base Flood Elevation (BFE) to comply with local regulations and FEMA requirements. This can mean placing it on an elevated concrete pad or pilings. Check your local floodplain management office for specific requirements.

Permits & Zoning in Florida

It depends on your county and municipality. (1) Temporary storage containers may need only a temporary placement or zoning permit, or no permit at all. (2) Permanent placement may require a building permit and must meet Florida Building Code requirements. (3) Miami-Dade and Broward counties are in the HVHZ, which carries additional requirements. Contact your local building department before ordering.
The High Velocity Hurricane Zone covers Miami-Dade and Broward counties and has enhanced building standards. Any permanent structure in the HVHZ (including a shipping container used as a building) must meet enhanced wind load requirements (up to 180 mph), use impact-resistant openings, and have engineered anchoring. Products installed in the HVHZ may need a Notice of Acceptance (NOA). For temporary storage use, requirements may be less restrictive.
Many Florida HOAs have rules about containers. Restrictions can include a maximum placement duration, placement only on driveways or behind the home, and advance approval from the HOA board. Some HOAs prohibit containers entirely. Review your CC&Rs and contact your HOA before ordering.

Container Types & Grades

A one-trip container was manufactured overseas, loaded with cargo for a single voyage, and retired. It arrives in near-new condition. A Wind and Water Tight (WWT) container is a used unit retired after years of service. It will show cosmetic wear but is guaranteed not to leak. WWT costs less than one-trip and suits storage. One-trip suits conversions, long-term use, or when appearance matters. Container One provides the warranty. Written warranty terms.
Five main types are available: 20ft Standard, 40ft Standard, 40ft High Cube, Modified/Custom, and Refrigerated. Visit our sizes page for a full comparison.
Yes. Any container used as an occupied structure must meet the Florida Building Code, including requirements for insulation, electrical, plumbing, fire safety, hurricane resistance, and accessibility. In the HVHZ, additional requirements apply. You will need a building permit and plans stamped by a licensed Florida engineer or architect. Read our Florida container homes guide for more details.

Site Preparation & Placement

For basic storage use, a level, well-drained surface is sufficient. Containers can be placed on concrete blocks, railroad ties, or a gravel pad. For permanent placement or in hurricane zones, a reinforced concrete slab with embedded anchor bolts is recommended. Florida's sandy and limestone soils drain well but may require deeper footings in some areas. For flood zone properties, elevated foundations may be required.
The truck needs a clear approach from the road to the drop point: 110 feet of straight, unobstructed space for a 20ft container and 130 feet for a 40ft. The path needs at least 15 feet of height to drive, at least 22 feet of height along the entire unloading path, and at least 10 feet of width. If you have any concerns about access, send photos or a description with your quote request.
Container One arranges delivery to rural properties and farms when the truck has the access and clearance it needs, including unpaved access roads that can carry the truck. If you have concerns about soft ground, narrow roads, or limited access, tell us when you request your quote.

More Questions

Call, text, or email with any other question about your Florida order.

Get a Free Quote (330) 510-5817